Stop Press

Basic setup of the SR868C8

Maximum cylinder temperature

By default, the controller sets the maximum cylinder temperature to 60⁰C.This should only be changed if a temperature mixing valve is fitted.

The SMX (Stop pump p1 if MaXimum tank temperature reached) setting can be accessed from the TEMP menu.

To change SMX setting in the controller input the following:

Press ESC

1. Press SET the PWD screen appears, first digit is adjustable using +/- (or SET to move to next digit)

2. Press SET the PWD screen appears, second digit is adjustable using +/-

3. Press SET the PWD screen appears, third digit is adjustable using +/-

4. Press SET the PWD screen appears, fourth digit four is adjustable using +/-

5. Press SET DT O appears

6. Press + DT F appears

7. Press + tHET appears

8. Press + TEMP appears

9. Press SET EMOF appears

10. Press + EMON appears

11. Press + CMx appears

12. Press + CMN appears

13. Press + CFR appears

14. Press + SMX appears

15. Press SET the existing value is shown (60⁰C.)

16. Press +/- until ? 75 ? (adjust to your chosen value) is displayed

17. Press ESC to confirm setting.

18. Press ESC TEMP appears

19. Press ESC Home screen appears